Type of film: Hybrid vinyl film with air channels (Designed for vehicle exterior with prefect paint condition). Glue: Solvent based adhesive, odor: solvent odor (Low-Medium Tack - Easy to reposition). Release liner: White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany. Storing period: 2 years if stored in +10°? For optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place.Indoor life: 4 years when followed rules of application and use. Outdoor life: 3 years when followed rules of application and use. Dimensional stability: shrinkage less than 5%. Breaking Strength: 22.7 N/10mm (Average). Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average).
Light Ageing in UV Exposure. Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.
Exposure cycle: ASTM D4329-13 cycle A. Lamp type: UVA-3408h UV at (60±2.5).
Water resistant and weather proof. Flexible and Stretchable for concave area.
Low cost to change the look of your vehicles. Easy installation with dry application method.
Heat gun or household blow dryer for shaping is required. Low - medium tack self adhesive (Easy to Reposition).
Easy to fit in most tight spots or corners (3M primer 94 is required for non sticky surfaces, curves & corners). Fluorescent Neon colors tend to fade faster than normal colors.
Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage.Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll.
For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won't stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal.Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. We would try our best to help you solving any problem. We are trying our best to describe all details of the product here.
We will try our best to solve the problem with you. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Decals & Vinyls". The seller is "socal-vinyl" and is located in this country: US.
This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Peru, Pakistan, Paraguay, Vietnam, Uruguay.